Teltonika TWS200
TSW200 is an industrial Ethernet switch with 2 SFP ports for long-range Fiber-optic communication and 8 Gigabit Ethernet ports that support IEEE802.af and IEE802.3at Power-over-Ethernet standards. Classified as power source equipment (PSE), it enables the centralization of the power supply, providing up to 30 watts per port and reducing the effort to install power.
Key Features
High-Capacity Ethernet Ports
8 x 10/100/1000 Mbps Ethernet ports with support for auto MDI/MDIX crossover for seamless connectivity.
PoE Capability
PoE support on all 8 ports with 802.3af/802.3at standards, providing up to 30 W per port and a total PoE power budget of 240 W.
Fibre Connectivity
2 x SFP ports for high-speed fibre-optic communication, adhering to IEEE 802.3 standards.
Rugged Design
Full aluminum housing with a wide operating temperature range (-40°C to 75°C), IP30 ingress protection, and DIN rail or wall-mount options.
Energy Efficiency and Power Range
Idle power consumption as low as 1.81 W, with input voltage ranging from 7–57 VDC, and PoE-out voltage range of 44–57 VDC.
Teltonika TWS200 Specifications
Ethernet
| Ethernet Ports (ETH) | 8 x ETH ports, 10/100/1000 Mbps, supports auto MDI/MDIX crossover |
| Fibre Ports | 2 x SFP ports |
| IEEE 802.3 Standards | 802.3i, 802.3u, 802.3ab, 802.3x, 802.3az |
| PoE Out Ports | Port 1 – 8 |
| PoE Standards | 802.3af, 802.3at Alternative B |
| PoE Max Power per Port (at PSE) | 30 W |
| Total PoE Power Budget (at PSE) | 240 W |
Performance Specifications
| Bandwidth (Non-blocking) | 20 Gbps |
| Packet Buffer | 128 KB |
| MAC Address Table Size | 2K entries |
| Jumbo Frame Support | 9216 bytes |
Power
| Connector | 2-pin industrial DC power socket |
| Input Voltage Range | 7 – 57 VDC |
| PoE-out Input Voltage Range | 44 – 57 VDC |
| Power Consumption | Idle: 1.81 W, Max: 5.5 W, PoE Max: 245.5 W |
| Physical Interfaces | 8 x RJ45 Ethernet ports, 2 x SFP ports |
| Status LEDs | 1 x Power LED, 16 x ETH status LEDs, 2 x SFP status LEDs |
| Other | 1 x Grounding screw |
Physical Specifications
| Casing Material | Full aluminum housing |
| Dimensions (W x H x D) | 132 x 44.2 x 95.1 mm |
| Weight | 517 g |
| Mounting Options | Integrated DIN rail bracket, wall mount, flat surface (additional kit needed) |
Operating Environment
| Operating Temperature | -40°C to 75°C |
| Operating Humidity | 5% to 95% non-condensing |
| Ingress Protection Rating | IP30 |
| Regulatory & Type Approvals | CE, UKCA, CITC, ANRT, FCC, IC, CB |
| EMC Emissions & Immunity Standards | EN 55032:2015 + A1:2020, EN 55035:2017 + A11:2020, EN IEC 61000-3-2:2019 + A1:2021, EN 61000-3-3:2013 + A1:2019 |
| ESD | EN 61000-4-2:2009 |
| Radiated Immunity | EN IEC 61000-4-3:2020 |
| EFT | EN 61000-4-4:2012 |
| Surge Immunity (AC Mains Power Port) | EN 61000-4-5:2014 + A1:2017 |
| CS | EN 61000-4-6:2014 |
| DIP | EN IEC 61000-4-11:2020 |
| Safety Standards | IEC 62368-1:2018, EN IEC 62368-1:2020+A11:2020 |